European Sealing Association
KLINGERSIL C 4409 2.0 mm - Printable Version

+- European Sealing Association (https://forum.bacibg.org)
+-- Forum: Flange Gaskets (https://forum.bacibg.org/forumdisplay.php?fid=1)
+--- Forum: Gasket Database (https://forum.bacibg.org/forumdisplay.php?fid=2)
+---- Forum: ESAData Approved Datasheets (https://forum.bacibg.org/forumdisplay.php?fid=10)
+---- Thread: KLINGERSIL C 4409 2.0 mm (/showthread.php?tid=168)



KLINGERSIL C 4409 2.0 mm - AMTEC - 06-22-2021

Approval of Data Import from gaksetdata.org

Publication Date: 26.03.2014
Link to gasketdata.org

Type: Sheet gasket
Material: Fiber


RE: KLINGERSIL C 4409 2.0 mm - Teadit - 10-22-2021

I am ok with amtec recommendation of cross check.


RE: KLINGERSIL C 4409 2.0 mm - Frenzelit - 11-02-2021

Agree with amtec recommendation of cross check.


RE: KLINGERSIL C 4409 2.0 mm - AMTEC - 11-05-2021

Cross-check:
We recommended a cross-check to verify the higher creep/relaxation factor compared to the one published on gasketdata.org..

PQR @ 30 MPa/250 °C

Result of cross-check:
The determined PQR value @30 MPa/250 °C was 0.74. The divergence to the value published by Klinger (0.81) is 0.07 which is above the allowable divergence of 0.05.
The PQR test was repeated, the same PQR value of 0.74 was determined in this second test.
Klinger agreed that PQR of 0.74 @ 30 MPa/250 °C will be published on the datasheet.