European Sealing Association
Klinger KLINGER top-chem2006 2.0 mm - Printable Version

+- European Sealing Association (https://forum.bacibg.org)
+-- Forum: Flange Gaskets (https://forum.bacibg.org/forumdisplay.php?fid=1)
+--- Forum: Gasket Database (https://forum.bacibg.org/forumdisplay.php?fid=2)
+---- Forum: ESAData Approved Datasheets (https://forum.bacibg.org/forumdisplay.php?fid=10)
+---- Thread: Klinger KLINGER top-chem2006 2.0 mm (/showthread.php?tid=195)



Klinger KLINGER top-chem2006 2.0 mm - AMTEC - 03-01-2023

Approval of new Datasheet

Type:        Sheet Gasket
Material:   PTFE

Cross-check: There is a change in the material behaviour @60 MPA/RT and 25 MPA/100 °C, see EG values. Therefore, we recommend to perform a EG test at RT or 100 °C as a cross-check.



RE: Klinger KLINGER top-chem2006 2.0 mm - Montero - 03-01-2023

I agree with AMTEC: "EG test at RT or 100 °C as a cross-check".

María


RE: Klinger KLINGER top-chem2006 2.0 mm - Donit - 03-06-2023

Agree with EG test at RT as a cross-check.


RE: Klinger KLINGER top-chem2006 2.0 mm - IDT - 03-09-2023

I would prefer EG test at 100°C


RE: Klinger KLINGER top-chem2006 2.0 mm - AMTEC - 05-23-2023

Cross-check:

A compression test at 100 °C was performed. The result of the cross-check confirms the orignal submitted data, except for the stress level 20 MPa. Klinger ragreed to rduce the EG value @ 20 MPa/100 °C to the result of the cross-check.