European Sealing Association
SGL SIGRAFLEX HOCHDRUCK PRO V20011Z3IP 2.0 mm - Printable Version

+- European Sealing Association (https://forum.bacibg.org)
+-- Forum: Flange Gaskets (https://forum.bacibg.org/forumdisplay.php?fid=1)
+--- Forum: Gasket Database (https://forum.bacibg.org/forumdisplay.php?fid=2)
+---- Forum: ESAData Approved Datasheets (https://forum.bacibg.org/forumdisplay.php?fid=10)
+---- Thread: SGL SIGRAFLEX HOCHDRUCK PRO V20011Z3IP 2.0 mm (/showthread.php?tid=201)



SGL SIGRAFLEX HOCHDRUCK PRO V20011Z3IP 2.0 mm - AMTEC - 05-23-2023

Update of Datasheet

Results of compression and creep relaxation tests 
at 550 °C were added. The characteristics at this temperature level fit to the ones determined at lower temperature levels, therefore we don not think that a cross-check is necessary.

Type: Sheet Gasket
Material: Graphite
Publication of last revision: 14.06.2022


RE: SGL SIGRAFLEX HOCHDRUCK PRO V20011Z3IP 2.0 mm - Garlock - 05-23-2023

Approved from my side.

Beside the situation, that a graphite gasket without encapsulation will not be able to withstand 550°C performance-wise, but this for sure has to be handled by the SGL team and is of no concern for the pure technical data.