European Sealing Association
Flexitallic Sigma 533 2.0 mm - Printable Version

+- European Sealing Association (https://forum.bacibg.org)
+-- Forum: Flange Gaskets (https://forum.bacibg.org/forumdisplay.php?fid=1)
+--- Forum: Gasket Database (https://forum.bacibg.org/forumdisplay.php?fid=2)
+---- Forum: ESAData Approved Datasheets (https://forum.bacibg.org/forumdisplay.php?fid=10)
+---- Thread: Flexitallic Sigma 533 2.0 mm (/showthread.php?tid=208)



Flexitallic Sigma 533 2.0 mm - AMTEC - 06-20-2024

Approval of new Datasheet



Type:         Sheet Gasket




Material:     PTFE




Cross-check: Due to the discontinuous course we recommend a EG test at RT.


RE: Flexitallic Sigma 533 2.0 mm - Donit - 06-20-2024

Agree with amtec suggestion.

BR, Maja


RE: Flexitallic Sigma 533 2.0 mm - Garlock - 06-20-2024

QSmax for 250°C is 30-50MPa higher than all other barium mgaskets on the market, questionable and needs to be checked.
Leakeage curve for 25bar needs to be renewed by flexitallic with longer holding times for mass-spectrometer in order to avoid unloading crossing the loading curve re-test with longer holding time will show fair result.

PQR looks good for all temperatures. Qsmax seems to be 20MPa higher than most other barium modified gaskets on the market, but this seems to be in line across temperatures.


RE: Flexitallic Sigma 533 2.0 mm - Montero - 06-21-2024

Agree with AMTEC


RE: Flexitallic Sigma 533 2.0 mm - Klinger - 06-26-2024

Agree with check on Qsmax f@ 250°C.


RE: Flexitallic Sigma 533 2.0 mm - AVKO - 06-27-2024

As I mentioned earlier, 260°C is the limit for this product - pretty sure it has some reserve, however we can expect all kind of discrepancies at 250°C.
A X-check will not hurt done with EG test at R.T.


RE: Flexitallic Sigma 533 2.0 mm - AMTEC - 07-15-2024

Cross-check:

QSmax @ 250°C

The EG values at all stress levels at 250 °C in the cross-check were within the allowable divergence compared to the values which were submitted by the manufacturer.

Therefore, we recommend to publish the characteristics of this material.