![]() |
|
Teadit Style 913M - Printable Version +- European Sealing Association (https://forum.bacibg.org) +-- Forum: Flange Gaskets (https://forum.bacibg.org/forumdisplay.php?fid=1) +--- Forum: Gasket Database (https://forum.bacibg.org/forumdisplay.php?fid=2) +---- Forum: ESAData Approved Datasheets (https://forum.bacibg.org/forumdisplay.php?fid=10) +---- Thread: Teadit Style 913M (/showthread.php?tid=211) |
Teadit Style 913M - AMTEC - 07-19-2024 Approval of a new datasheet submitted by Teadit International Produktions GmbH Type: Spiralwound Gasket Material: GR Since the characteristics have been determined by an independent testing laboratory, no cross-check is necessary unless you feel that a property is not realistic. RE: Teadit Style 913M - Klinger - 07-22-2024 As I followed the link provided in the datasheet I found that this gasket may be manufactured in various countries (Brazil, China, India, USA). For this reason I may ask if the place of manufacturing should be included in e.g. the Brandname (for the database only) to ensure a link between gasket factors and the related manufacturing plant. Just an idea. I've already accetpted the datasheet anyway
RE: Teadit Style 913M - AVKO - 07-25-2024 Hm, I see your point, but after all the brand is guaranteeing with its name about the quality and all the specs. So the product should be equal all around, no mather the country of origin. I've found that Teadit had voted for their own product here, perhaps by accident ![]() Still we need one more vote. RE: Teadit Style 913M - AMTEC - 07-29-2024 (07-22-2024, 03:58 PM)Klinger Wrote: As I followed the link provided in the datasheet I found that this gasket may be manufactured in various countries (Brazil, China, India, USA). For this reason I may ask if the place of manufacturing should be included in e.g. the Brandname (for the database only) to ensure a link between gasket factors and the related manufacturing plant. Just an idea. I've already accetpted the datasheet anyway We will put this topic on the agenda of the next Gasket Division Meeting. But as Velin mentioned in his post, the quality should be the same, independent from the manufacturing location. |