European Sealing Association
Klinger Gaja 2.0 mm - Printable Version

+- European Sealing Association (https://forum.bacibg.org)
+-- Forum: Flange Gaskets (https://forum.bacibg.org/forumdisplay.php?fid=1)
+--- Forum: Gasket Database (https://forum.bacibg.org/forumdisplay.php?fid=2)
+---- Forum: ESAData Approved Datasheets (https://forum.bacibg.org/forumdisplay.php?fid=10)
+---- Thread: Klinger Gaja 2.0 mm (/showthread.php?tid=215)



Klinger Gaja 2.0 mm - AMTEC - 09-17-2024

Approval of new Datasheet

Type:        Sheet Gasket
Material:   Fiber

Cross-check: We recommend a PQR test @ 200 MPa/100 °C or a EG test @ 100 °C.


RE: Klinger Gaja 2.0 mm - Teadit - 09-22-2024

Would say to check PQR with 50 or 200MPa at 100°C


RE: Klinger Gaja 2.0 mm - SGL - 09-23-2024

I slightly prefer to do the PQR with 50 MPa at 100°C


RE: Klinger Gaja 2.0 mm - Montero - 09-24-2024

Agree with Teadit


RE: Klinger Gaja 2.0 mm - AMTEC - 10-14-2024

Cross-check:

PQR @ 50MPa/100°C

The PQR value at 50 MPa/100 °C in the cross-check was 0,88 which is a little bit higher than the results of the manufacturers double test (0,86).

Therefore, we recommend to publish the characteristics of this material.