![]() |
|
Spetech SPETOTERM TUI 911J 800H 2.5 mm - Printable Version +- European Sealing Association (https://forum.bacibg.org) +-- Forum: Flange Gaskets (https://forum.bacibg.org/forumdisplay.php?fid=1) +--- Forum: Gasket Database (https://forum.bacibg.org/forumdisplay.php?fid=2) +---- Forum: ESAData Approved Datasheets (https://forum.bacibg.org/forumdisplay.php?fid=10) +---- Thread: Spetech SPETOTERM TUI 911J 800H 2.5 mm (/showthread.php?tid=245) |
Spetech SPETOTERM TUI 911J 800H 2.5 mm - AMTEC - 05-19-2025 Approval of new Datasheet Type: Corrugated Gasket Material: Silicate Layer Cross-check: We recommend a PQR test @ 30 MPa/650 °C. RE: Spetech SPETOTERM TUI 911J 800H 2.5 mm - Frenzelit - 05-27-2025 Agree with suggestion of Amtec RE: Spetech SPETOTERM TUI 911J 800H 2.5 mm - AMTEC - 09-01-2025 Result of Cross-check PQR @ 30 MPa / 650 °C The cross-check was performed, the PQR factor is confirmed by the cross-check We recommend to published the datasheet in the current version. |