![]() |
|
SGL SIGRAFLEX ECONOMY V20010C4 2.0mm - Printable Version +- European Sealing Association (https://forum.bacibg.org) +-- Forum: Flange Gaskets (https://forum.bacibg.org/forumdisplay.php?fid=1) +--- Forum: Gasket Database (https://forum.bacibg.org/forumdisplay.php?fid=2) +---- Forum: ESAData Approved Datasheets (https://forum.bacibg.org/forumdisplay.php?fid=10) +---- Thread: SGL SIGRAFLEX ECONOMY V20010C4 2.0mm (/showthread.php?tid=78) |
SGL SIGRAFLEX ECONOMY V20010C4 2.0mm - root - 01-06-2020 Approval of Data Import from gasketdata.org Type: sheet gasket Publication: 06.02.2017 Material:GR Link to gasketdata.org RE: SGL SIGRAFLEX ECONOMY V20010C4 2.0mm - Klinger - 01-14-2022 I basically agree with publication but would appreciate explanation why QSmax @400°C > QSmax300°C? RE: SGL SIGRAFLEX ECONOMY V20010C4 2.0mm - Frenzelit - 01-14-2022 We agree with Klinger and appreciate an explanation why QSmax @400°C > QSmax300°C. RE: SGL SIGRAFLEX ECONOMY V20010C4 2.0mm - SGL - 01-17-2022 I do not mind a cross check of course, but I like to explain why we think that QSmax 400°C > QSmax 300°C: At higher temperatures QSmax values are normally lower due to weaker mechanical properties of the graphite gasket, consisting of flexible graphite foils and a stainless steel foil. For adhesive bonded materials (such as this one) the degradation effect often is even stronger, as the adhesive negatively impacts the strength of the graphite foils at e. g. 150°C or 300°C. At even higher temperatures (e. g. 400°C) the negative impact of the adhesive reduces significantly, as the adhesive deteriorates at high temperatures. Rainer |