Please share your comments about the new layout with us.
http://amtec-gasketdata.martensmedien.de/en/AeS367oAr
http://amtec-gasketdata.martensmedien.de/en/AeS367oAr
|
First Draft of New Layout
|
|
Please share your comments about the new layout with us.
http://amtec-gasketdata.martensmedien.de/en/AeS367oAr
09-12-2022, 04:46 PM
1) Test Temperature Range: Current limit at 400°C, but there is a gasket with characteristics at 500°C
2) Some words are in German language, such as "Graphit" or "Faser" 3) max. pressure: Either multiply by a factor of 10 and stick to bar or use the unit MPa 4) Initial Gasket Thickness: The search result does not adapt to this search criteria 5) For some gaskets the standard is mentioned, for others it is not. It needs to be mentioned for all gaskets. 6) Gasket Type: What does "gaskettype.18" mean? 7) The light blue background for the photos is not ideal
10-17-2022, 12:06 PM
Well done! I like the visual appearance and structure very well. The points from SGL in the previous comment have obviously already been implemented.
Just some additional minor comments · There is still the word “Montage” used in the leakge curve data labelling. · The gaskettype.18 can also be found in current database https://www.esadata.org/ · The internal reports for task group evaluation show the bore extrusion but public datasheets don’t |
|
« Next Oldest | Next Newest »
|