Approval of Data Import from gaksetdata.org
Publication Date: 22.05.2014
Link to gasketdata.org
Type: Sheet gasket
Material: Fiber
Publication Date: 22.05.2014
Link to gasketdata.org
Type: Sheet gasket
Material: Fiber
| Poll: Do you agree on publishing the data? You do not have permission to vote in this poll. |
|||
| Yes | 1 | 25.00% | |
| No (Comment in the thread) | 0 | 0% | |
| Yes, but cross-check is required (Specify kind of test in the thread) | 1 | 25.00% | |
| Abstain | 2 | 50.00% | |
| Total | 4 vote(s) | 100% | |
| * You voted for this item. | [Show Results] |
|
KLINGERSIL C 4430plus 2.0 mm
|
|
Approval of Data Import from gaksetdata.org
Publication Date: 22.05.2014 Link to gasketdata.org Type: Sheet gasket Material: Fiber
11-02-2021, 02:10 PM
Agree with suggestion: cross-check: EG @ 300 °C recommended
Maja
11-03-2021, 02:48 PM
agree with suggestion of amtec for cross check
Cross-check:
We recommended a cross-check to verify the recovery behavior at 300 °C. EG @ 300 °C Result of cross-check: The moduli of elasticy measured in the cross-check are all withing the allowable divergence for cross-checks. The value at the initial gasket stress level of 20 MPa is declared as an outliner. We believe that this is not a realstic value, it is caused by the heating up at this stress level and the material change during this process. We recommend to publish the datasheet. |
|
« Next Oldest | Next Newest »
|