Approval of Data Import from gasketdata.org
Type: sheet gasket
Publication: 14.01.2013
Material: GR
Link to gasketdata.org
Type: sheet gasket
Publication: 14.01.2013
Material: GR
Link to gasketdata.org
| Poll: Do you agree on publishing the data? You do not have permission to vote in this poll. |
|||
| Yes | 4 | 57.14% | |
| No (Comment in the thread) | 0 | 0% | |
| Yes, but cross-check is required (Specify kind of test in the thread) | 2 | 28.57% | |
| Abstain | 1 | 14.29% | |
| Total | 7 vote(s) | 100% | |
| * You voted for this item. | [Show Results] |
|
Frenzelit novaphit MST with IB and XP Tech 2.0mm
|
|
Approval of Data Import from gasketdata.org
Type: sheet gasket Publication: 14.01.2013 Material: GR Link to gasketdata.org
10-05-2020, 03:01 PM
suggest cross-check of Qsmax at 300°C - seems to be to high in comparison to the same material without IB...
10-05-2020, 05:12 PM
Agree with IDT, cross-check of Qsmax at 300°C.
Cross-check:
PQR @ QSmax (220 MPa)/300 °C Result: The sample failed in the PQR test @ 220 MPa/300 °C. Frenzelit was informed about this result and performed PQR double tests at 200 MPa/300 °C. The gasket passed these tests and the PQR values were determined at 0.97. The datasheet is updated with lower QSmax value at 300 °C and with PQR values at 200 MPa/300 °C. |
|
« Next Oldest | Next Newest »
|