Poll: Do you agree on publishing the data?
You do not have permission to vote in this poll.
Yes
33.33%
2 33.33%
No (Comment in the thread)
0%
0 0%
Yes, but cross-check is required (Specify kind of test in the thread)
16.67%
1 16.67%
Abstain
50.00%
3 50.00%
Total 6 vote(s) 100%
* You voted for this item. [Show Results]

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Flexitallic DN40 SWG CGI PTFE 316L 4.6mm
#1
Thumbs Up 
Approval of Data Import from gasketdata.org

Type: spiralwound gasket
Publication: 01/09/17

Material: PTFE

Link to gasketdata.org


Attached Files
.pdf   Flexitallic DN40 SWG CGI PTFE 316L_ESA Approval_2020-07-22.pdf (Size: 110.46 KB / Downloads: 18)
Reply
#2
I would expect that the Pqr value at 30 MPa and 150°C will be higher. Maybe we shall ask the manufacturer to repeat the Pqr tests at 30MPa at 150°C and 250°C.
Reply
#3
Strange course of the PQR value at 50 MPa... I would recommend a cross-check at 150°Cand also the higher temperature
Reply
#4
Cross-check PQR @ 50 MPa/150 °C

The PQR value of the cross-check (0.78) is within the allowable range compared to the mean value (0.80) of the double test. Therefore, the datasheet is accepted.


Attached Files
.pdf   Flexitallic DN40 SWG CGI PTFE 316L Cross-Check_2020-08-27.pdf (Size: 18.91 KB / Downloads: 1)
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)