09-02-2024, 03:08 PM (This post was last modified: 09-30-2024, 10:25 AM by AMTEC.)
Approval of new Datasheet submitted by Jawa Industrie-Dichtungen GmbH (Non-member)
Type: Corrugated Gasket
Material: GR
Since this is a new datasheet, and the tests were not performed by one of the acknowledged independent test houses, we recommend the following cross-check:
The EG values at 200 °C in the cross-check was fit pretty good to the values submitted by the manufacturer. The divergence was within the acceptable limit. Especially at high stresses, the divergence was below 10%.
Therefore, we recommend to publish the characteristics of this material.