03-17-2026, 08:15 PM (This post was last modified: 04-28-2026, 07:01 PM by AMTEC.)
Approval of new Datasheet
Type: Sheet Gasket Material: PTFE
Cross-check: The PQR values at low stresses and RT are higher than values of other PTFE gaskets. Therefore, we recommend a PQR test at 25 MPa @ 150 °C.
The cross-check was performed, the PQR factor determined in the cross-check is a little bit lower than the PQR factor in the manufacturer´s double test, but the divergence is within an acceptable range.
We recommend to published the datasheet in the current version.