Poll: Do you agree on publishing the data?
You do not have permission to vote in this poll.
Yes
57.14%
4 57.14%
No (Comment in the thread)
0%
0 0%
Yes, but cross-check is required (Specify kind of test in the thread)
28.57%
2 28.57%
Abstain
14.29%
1 14.29%
Total 7 vote(s) 100%
* You voted for this item. [Show Results]

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Frenzelit novaphit MST with IB and XP Tech 2.0mm
#1
Approval of Data Import from gasketdata.org

Type: sheet gasket
Publication: 14.01.2013

Material: GR

Link to gasketdata.org


Attached Files
.pdf   Frenzelit novaphit MST with IB and XP 2,0 mm_ESA Approval_2020-10-03.pdf (Size: 220.69 KB / Downloads: 16)
.pdf   Frenzelit novaphit MST with IB and XP 2,0 mm_a_ESA Approval_2020-12-11.pdf (Size: 366.63 KB / Downloads: 4)
Reply
#2
suggest cross-check of Qsmax at 300°C - seems to be to high in comparison to the same material without IB...
Reply
#3
Agree with IDT, cross-check of Qsmax at 300°C.
Reply
#4
Cross-check:

PQR @ QSmax (220 MPa)/300 °C

Result:
The sample failed in the PQR test @ 220 MPa/300 °C.
Frenzelit was informed about this result and performed PQR double tests at 200 MPa/300 °C. The gasket passed these tests and the PQR values were determined at 0.97. The datasheet is updated with lower QSmax value at 300 °C and with PQR values at 200 MPa/300 °C.


Attached Files
.pdf   Frenzelit novaphit MST with IB and XP 2,0 mm_Cross-check.pdf (Size: 53.23 KB / Downloads: 2)
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)