Approval of new Datasheet
Type: Corrugated Gasket
Material: Silicate Layer
Cross-check: We recommend a PQR test @ 30 MPa/650 °C.
Type: Corrugated Gasket
Material: Silicate Layer
Cross-check: We recommend a PQR test @ 30 MPa/650 °C.
| Poll: Do you agree on publishing the datasheet? You do not have permission to vote in this poll. |
|||
| Yes | 2 | 66.67% | |
| No (Comment in the thread) | 0 | 0% | |
| Yes, but cross-check is required (Specify kind of test in the thread) | 1 | 33.33% | |
| Abstain | 0 | 0% | |
| Total | 3 vote(s) | 100% | |
| * You voted for this item. | [Show Results] |
|
Spetech SPETOTERM TUI 911J 800H 2.5 mm
|
|
Approval of new Datasheet
Type: Corrugated Gasket Material: Silicate Layer Cross-check: We recommend a PQR test @ 30 MPa/650 °C.
05-27-2025, 03:01 PM
Agree with suggestion of Amtec
09-01-2025, 07:41 PM
Result of Cross-check
PQR @ 30 MPa / 650 °C The cross-check was performed, the PQR factor is confirmed by the cross-check We recommend to published the datasheet in the current version. |
|
« Next Oldest | Next Newest »
|