05-08-2025, 04:18 PM
Result of Cross-check
PQR test @ 150 MPa /200 °C:
The PQR value was 0.85, which means it is 0.06 below the submitted value and therefore not acceptable. The test was repeated and also this result (0.82) was below the submitted values.
We contacted the manufacturer and he agreed that the results of the cross-check should be used on the datasheet.
N.B. We also performed a PQR test @ 70 MPa/400 °C. The measured PQR (0.68) was also lower than the submitted values (0.69, 0.74), but still in the acceptable range.
PQR test @ 150 MPa /200 °C:
The PQR value was 0.85, which means it is 0.06 below the submitted value and therefore not acceptable. The test was repeated and also this result (0.82) was below the submitted values.
We contacted the manufacturer and he agreed that the results of the cross-check should be used on the datasheet.
N.B. We also performed a PQR test @ 70 MPa/400 °C. The measured PQR (0.68) was also lower than the submitted values (0.69, 0.74), but still in the acceptable range.

