Posts: 249
Threads: 165
Joined: Dec 2019
Reputation:
1
09-17-2024, 05:27 PM
(This post was last modified: 10-14-2024, 11:02 AM by AMTEC.)
Approval of new Datasheet
Type: Sheet Gasket
Material: Fiber
Cross-check: We recommend a PQR test @ 200 MPa/100 °C or a EG test @ 100 °C.
Posts: 40
Threads: 0
Joined: Dec 2019
Reputation:
1
Would say to check PQR with 50 or 200MPa at 100°C
Posts: 53
Threads: 0
Joined: Dec 2019
Reputation:
0
I slightly prefer to do the PQR with 50 MPa at 100°C
Posts: 249
Threads: 165
Joined: Dec 2019
Reputation:
1
Cross-check:
PQR @ 50MPa/100°C
The PQR value at 50 MPa/100 °C in the cross-check was 0,88 which is a little bit higher than the results of the manufacturers double test (0,86).
Therefore, we recommend to publish the characteristics of this material.